Installing the pressure
gauges often require some accessories. Badotherm delivers these accessories
such as overpressure protector or syphon for steam applications. All
accessories are made of stainless steel and can be mounted and set on the
pressure gauge in our factory.
1.
Syphon range: Syphons are
used to protect pressure gauges to the effect of hot process media under
pressure such as steam. The syphon allows the media to condensate in the
syphon. This prevents hot media to enter the pressure gauge. This increases the
life time of a pressure gauge with hot media. There are several designs for
different installation situation. The BDT42 coil syphon is used for vertical
installation, the BDT43 for horizontal installation. The BDT44 is a more
compact design of the BDT42 coiled syphon.
2.
BDT40 mounting bracket with
BDT41 adapter nipple :
The BDT40 is a mounting bracket designed to
mount pressure gauges to the wall or on a 2” pipe. Together with the BDT41
adaptor nipple the set can be mounted in the location that is required. The
design is a clamp that can be opened fully for easy mounting after the tubing
or diaphragm seal is mounted. The wall mounting design is based on the DIN
16281.
3.
BDT45 pressure snubber:
The BDT45 is an adjustable pulsation
protection accessory against sudden pressure pulsations and surges. It is
adjustable by means of a throttle screw. The screw closes or opens the open
flow in the device so that the fluctuations are dampened. Adjustment of the
setting is possible during operation. This enables sensing instruments to
provide consistent readings, while extending product service life. The
pulsation dampener is often supplied assembled to the pressure gauge. It is not
to be used in combination with diaphragm seal.